Lulzbot TAZ4

Lulzbot TAZ4
  • in place, currently being tested
  • not networked, uses sd card to load prints
  • undergoing testing (at UMD) with both ABS and PLA
  • Materials available: ABS (in white), ABS (in blue and red), Ninjaflex TPE (in yellow)
Build Volume: 
295mm x 275mm x 250mm
PLA, ABS, and rubber-like (NinjaFlex) materials.
Software Used: 
Any non-specialized 3D printing software (Repetier Host or Pronterface are recommended)
In Service